FASTCAM-APX RS Hardware Manual
-144-
5.1.3.4. Using DHCP
（
Dynamic Host Configuration Protocol
）
The FASTCAM-APX RS supports the DHCP (Dynamic Host Configuration Protocol)
feature. In a system where a DHCP server is installed, a camera IP address is obtained
from the server. Follow the below procedure to use this feature:
Setup procedure
1.
Press the MENU button on the keypad to display the menu list.
2.
Use the up-down and left-right keys to move the cursor to [DHCP] and press the
ENTER key to select it.
3
．
Use the up-down keys to move the cursor to [OFF] of [ON].
4
．
Press the ENTER key to select either [OFF] or [ON].
