FASTCAM-APX RS Hardware Manual
-112-
*Note: When you use both MCDL and IRIG together, select [MCDL IRIG ON] on the
menu.
To add an offset to a sampled IRIG code:
1. Select the [IRIG OFFSET] menu.
2. Specify an offset value within the range of +0.999999 sec to –0.999999 sec.
3. The specified offset is added to all sampled IRIG codes.
When an IRIG code is being input, the code is displayed with white letters, as shown
below, with a white box at the extreme left of the code string, with an offset time of the
IRIG code being shown immediately below it.
When no IRIG code is being input, the current IRIG code is displayed with gray letters
as shown below. At this time, the IRIG code is continuously counted by the counter in
the camera system, though.
