FASTCAM-APX RS Hardware Manual
-74-
3.6.2.2. Image window in any position
This is a way of setting framing parameters based on the image resolution with the
image window placed in any position within the image sensor.
1. Press the MENU key on the keypad to
display the menu on the screen. Use the
U-D and L-R keys to select [VARIBLE]
then [RESOLUTION] and press the
ENTER key.
2. The display turns to the CENTER/FREE
screen shown here.
Select [FREE] and the display turns to
the [POSITION ADJUSTMENT] screen
that allows you to select a position for
image data readout within the image
sensor surface as shown below.
3. Note the rectangle (image window) of
128 x 16 pixels in the center of the
screen.
4. Use the U-D and L-R keys on the
keypad to place the window in your
desired position. The window moves at
the increments of 32 pixels to left or right
and 2 lines up or down. Once the
readout window is in your desired
position, press the ENTER key on the
keypad to set it. The display turns to
[RESOLUTION ADJUSTMENT] as
shown here.
