FASTCAM-APX RS Hardware Manual
-106-
3.13.2. Setting GENERAL OUT Signals
This section describes how to set up signals output from the GENERAL OUT
connector.
1. Press the MENU key on the keypad to display the menu list.
2. Move the cursor by the U-D keys to select the [GENERAL OUT] menu.
3. The GENERAL OUT menu is now displayed. The items are as follows:
Menu
Display
Description Signal
EXPOSE
POS
Outputs sensor’s exposure duration in HIGH level.
TTL level,
Positive logic
EXPOSE
NEG
Outputs sensor’s exposure duration in LOW level.
TTL level,
Negative logic
REC POS
Outputs recording duration in HIGH level.
TTL level,
Positive logic
REC NEG
Outputs recording duration in LOW level.
TTL level,
Negative logic
TRIGGER
POS
Transfers received external trigger signal in HIGH
level.
TTL level,
Positive logic
TRIGGER
NEG
Transfers received external trigger signal in LOW
level.
TTL level,
Negative logic
READY POS
Outputs pulse of specified level when camera is
waiting for REC trigger. See note below.
TTL level,
Positive logic
READY
NEG
Outputs pulse of specified level when camera is
waiting for REC trigger. See note below.
TTL level,
Negative logic
