FASTCAM-APX RS Hardware Manual
-114-
Operation of the camera in each triggering mode:
READY AND TRIG mode (default setting)
When the camera is set in this triggering mode (default setting), the READY key must
always be pressed before pressing the REC key to start a recording.
DIRECT TRIG mode (optional setting)
With this triggering mode selected, a recording can be started with presses on the REC
key only, without pressing the READY key to set the camera in the READY mode. Note
this mode is optional and should be selected in the above-describe procedure to use it.
When DIRECT TRIG mode is selected, the camera operation sequence
for each triggering mode is as follows:
Note: [ ] denotes the camera behavior while “trigger” means a trigger entry by pressing
the REC button on the keypad.
・
For START, RANDOM, RANDOM_RESET or TWO_STAGES mode of recording:
Sequence: [LIVE]
→
“trigger”
→
[READY]
→
“trigger”
→
[REC]
・
For CENTER, END, MANUAL, RANDOM_CENTER or RANDOM_ MANUAL mode of
operation:
Sequence: [LIVE]
→
“trigger”
→
[ENDLESS]
→
“trigger”
→
[REC]
