FASTCAM-APX RS Hardware Manual
-126-
4.7. Displaying Crosshair Cursor
The APX RS has a crosshair cursor display function. This function is useful to pinpoint
certain points of interest within the image displayed on the video screen at recording
and playback. The following shows how to use the crosshair function.
1. Press the MENU key on the keypad to display the menu list.
2. Move the cursor by the U-D and L-R keys to select the [CURSOR] menu.
3. Now the CURSOR menu is displayed on the screen as shown below.
4. Two types of crosshair lines are available – White (ON 1) and Black (ON 2) to
choose from depending on the brightness of the image.
5. Move the cursor by the U-D keys to select ON 1, ON 2 or OFF. Press the ENTER
key to set the selection.
6. Press the MENU key to exit the menu.
