FASTCAM-APX RS Hardware Manual
-143-
5.1.3.3. Setting camera IP address
The procedure to set up the camera IP address is described below:
Procedure
1.
Press the MENU button on the keypad to display the menu list.
2.
Move the cursor to [
DIGITAL I/F SET
] using the up-down and left-right keys and
press the ENTER key to select it.
3
．
Use the left-right keys to selet a necessary item and set the IP address using the
up-down keys.
4
．
Press the ENTER key to complete the setting.
Note: When you connect multiple cameras to a PC, the Ethernet interface allows for setting each
camera to a different IP address. This feature of the Ethernet interface frees you from referring to
the next section (5.2. Connecting multiple FASTCAM-APX RS cameras to a PC) of this manual.
Note: The Ethernet interface function is reset whenever the IP address of a
FASTCAM-APX RS camera is set up from the keypad. In case the PC loses control of
the camera for any reason, the PC can regain control by setting the camera’s IP
address from the keypad again.
