FASTCAM-APX RS Hardware Manual
-78-
3.6.5. Reverting to Default Settings
1. When you wish to exit the VARIABLE
Setting Mode screen to revert to the
default setting screen, simply press the
FRAMERATE key on the keypad.
2. Immediately, you are back in the default
setting screen as shown in the figure.
And, if you wish to go to the VARIABLE
Setting Mode screen again, press the
MENU key and select [VARIABLE], then
[LOAD] and press the ENTER key. Load
the saved setup data as necessary in
the manner discussed in subsection
3.6.3.
