FASTCAM-APX RS Hardware Manual
-64-
4
The meaning of each item is as follows:
-FRAME
Number of frames to record BEFORE a trigger.
+FRAME
Number of frames to record AFTER a trigger.
TOTAL FRAME Total number of frames to record at a trigger.
5
Now set the numbers of frames to record before and after a trigger. Set a number
using the U-D keys to increase or decrease the number, and L-R keys to jump the
digit position. If you set the number for [–FRAME] as shown below, for example,
the number for [+FRAME] is automatically set depending on the total number of
frames to record at each trigger.
6. When you are done, press the ENTER key to enter the settings. Now you should
see the trigger mode setup indication of [R150FR_200FR] in the
upper left corner of the screen as shown below, where the number of frames to
record after a trigger is 150 and the total number of frames to record at each trigger
200. Now the camera is ready to record 50 frames before and 150 frames after
each trigger.
↑
Increase
Number
Decrease
↓
←
Left Number digit Right
→
