PerkinElmer 200 UV/VIS Series, User Manual

Page: 89 / 177

Editing the Current Method Using Method Mode
4 - 9
In the RSP/PW field, press the corresponding softkey to enter the value for the
“Smoothing” mode. This field displays either RSP or PW depending on the detec-
tor’s configuration. For more information on selecting the correct value, see the
“Detector Response Time” topic in Chapter 8, Principles.
4
In the AZ field, press the softkey to select Autozero, or press the No
softkey to unselect Autozero.
YES NO
5
When you are finished entering the control parameters for Step 1, you can press the
key to go back to the Method Screen, or you can add another Step to the
method.
return
6
To add another Step to the method, press the key, or the right arrow key.
To move from one Step to another, press the softkey. The detector prompts
you to enter the step number. Use the numeric keypad to type the number, then
press the key.
To save the changes to the method you can store it. For information on storing the
method, see the “Storing a Method” topic later in this chapter.
Press the key to go back to the Method Screen.
enter
STEP
enter
return
7
When you make changes to the parameters, the method status at the top of the
screen switches to CHNGD, for “changed.”