PerkinElmer 200 UV/VIS Series, User Manual

Page: 22 / 177

Safety and Regulatory Information Warnings from the User’s Manual
S - 20
Warnings from the User’s Manual
Generic Warnings
Before installing or operating the Detector, read the following information concerning haz-
ards and potential hazards. You should ensure that anyone involved with installation and/or
operation of the instrument is knowledgeable in both general safety practices for the labora-
tory and safety practices for the. Detector. Get advice from your safety engineer, industrial
hygienist, environmental engineer, or safety manager before you install or use the instru-
ment.
Moving the Detector
Although the Series 200 UV/VIS Detector weighs only 11.4 kg (25 lbs), improper lifting can
cause injury to the back. Exercise caution when lifting.
High Voltage
The Series 200 UV/VIS Detector contains high voltage (up to 375 volts). Before removing the
outside cover to change the lamp, detach the line cord from the Detector and wait at least
one minute.
Ultraviolet Radiation
The deuterium lamp emits ultraviolet radiation. Exposure to ultraviolet radiation can cause
permanent damage to the eyes and blindness. This can occur by opening the detector head.
You must wear approved protective goggles whenever there is a potential for exposure to
ultraviolet radiation from the deuterium lamp. The instrument should be turned off and
unplugged before removing or exchanging the lamp. The lamp must be correctly positioned
in its cradle before operating the detector.