PerkinElmer 200 UV/VIS Series, User Manual

Page: 78 / 177

Using Manual Mode Scanning the Chromatogram
3 - 8
Scanning the Chromatogram
Scanning lets you scan the sample in the flowcell across the selected wavelength range after
stopping the flow. Scanning allows you to create, on the recorder, a spectrum of the sample
trapped in the flowcell. The Scan command tells the detector to scan across all wavelengths
in the sample cell. To best correlate the scan wavelength, you can have the recorder mark
the output at a specified interval.
F8
DETECTOR MANUAL SETTINGS SCREEN
From the Detector Manual Settings Screen, press F8 to move to the Scan
Screen.
SCAN
1
SCAN SCREEN
Press the key to move from one field to the next. Then use the numeric keypad
to enter the parameters in each field as shown in the table on the next page.
enter
2