PerkinElmer 200 UV/VIS Series, User Manual

Page: 124 / 177

Configuring the Detector Setting Configuration Options
6 - 14
NOTE: for the messages shown on this page, “ON INTERNAL LEAK DETECTOR ERROR” and “ON
EXTERNAL LEAK DETECTOR ERROR” ignore (IGNR) the messages. Notice that in this condition, the
default condition is “STOP”.
Press the softkey to access the Leak Detector Setup Screen.
LEAK
From the Instrument Setup Screen, press F8 to move to page two of the Instrument
Setup Screen.
MORE
1
2
3
Use the cursor arrow keys or the key to move from field to field. Press the corre-
sponding softkey to set the value in the field to STOP, CONT, or IGNORE.
enter
INSTRUMENT SET-UP SCREEN - PAGE 2
LEAK DETECTOR SET-UP SCREEN
4
To accept and save the change(s) and return to the Instrument Setup Screen, press
the
key.
To cancel changes and return to the Instrument Setup Screen press the key.
return
quit