Safety and Regulatory Information
Safety and Regulatory Information
S - 11
Storage Conditions
The Series 200 UV/VIS Detector may be stored under the following conditions:
•
Ambient temperature is –20 to +60 °C
•
Ambient relative humidity is 20 to 80% noncondensing
•
Altitude is in the range 0 to 12 000 m
Dimensions and Weight
The physical dimensions of the Detector are:
Weight:
11.4 kg (25 lbs.)
Height:
16.7 cm (6-9/16 in.)
Width:
33.8 cm (13-5/16 in.)
Depth:
48.6 cm (19-1/8 in.)
Additional Electrical Considerations and Warnings
Installation Category
This instrument is able to withstand transient overvoltage according to Installation Cate-
gory II as defined in IEC 1010-1.
Pollution Degree
This equipment will operate safely in environments that contain nonconductive foreign mat-
ter up to Pollution Degree 2 in IEC 1010-1.
Observe the following guidelines:
•
Service on electrical components should be performed only by a qualified PerkinElmer
service representative or similarly trained and authorized person.
•
Be sure the power cord is the correct one for your laboratory. The line cord used must
meet the national safety agency’s guidelines for the particular country of use.
•
Some power cords available from PerkinElmer are illustrated below:
Do not operate the instrument with any covers
or parts removed.
Summary of Contents for 200 UV/VIS Series
