PerkinElmer 200 UV/VIS Series, User Manual

Page: 72 / 177

Using Manual Mode Understanding Manual Mode
3 - 2
Understanding Manual Mode
When you set the detector in the Manual Mode, the default main screen is the Detector Man-
ual Settings Screen shown below.
In Manual mode, you can manually set, and thereby immediately change, the operating
parameters for the detector. The operating parameters include the wavelength range,
response time or peak width value, and timed events. You cannot save the parameters that
you set in Manual mode. The set of parameters that appear the first time you start the
detector are the default settings. The next time you start the detector in Manual mode, the
parameters that appear are the last set of parameters entered.
You may switch between the Manual and Method mode of operation at any time, except
while running a method or sequence. For more information on Method mode, see Chapter 4,
Using Method Mode.