PerkinElmer 200 UV/VIS Series, User Manual

Page: 106 / 177

Using Sequences Defining a Sequence
5 - 6
Procedure for Defining a Sequence
F5
METHOD SCREEN
Press F5 from the Main Method Screen to go to the Sequence Screen. The
Method Number for SET 1 is highlighted. A Set indicates the method number and the
number of injections. A sequence may contain up to 20 Sets. When a Set is high-
lighted, you can change the method number and the number of injections.
SEQ
To change the default method for SET 1, use the numeric keys to type in a new method
number.
To change the number of injections for the SET, press the right arrow key to move to the
INJ field and enter the number. The number of injections indicates the number of times
to run the method.
To create another SET, press either the key, the right arrow key, or the key.
If you do not want to create another SET, press the key and the number and
name of the method you typed in will be accepted and you will return to the Main Method
Screen.
To move from one Step to another, press the softkey. The detector prompts you to
enter the Set number. Use the numeric keypad to type the number, then press the
key. Alternatively, you can press the up arrow or down arrow key to move from one Step
to another.
enter insert
return
SET
enter
Message line
1
2
SEQUENCE SCREEN