PerkinElmer 200 UV/VIS Series, User Manual

Page: 119 / 177

Setting Configuration Options Configuring the Detector
6 - 9
Adjusting the Computer Output
The computer output value sets the number of volts per absorbance unit. You need to match
the output from the detector to your data handling system. Refer to the operating manual for
your data handling system to identify the required voltage.
1
2
Use the cursor arrow keys to navigate to the COMPUTER OUTPUT field. Select one of the
following softkeys to change the value in the field:
, , . The values on the
softkeys indicate volts per absorbance unit.
0.2 0.5 1.0
To accept and save the change(s) and return to the Instrument Setup Screen, press
the
key.
To cancel changes and return to the Instrument Setup Screen press the key.
return
quit
ANALOG OUTPUT SCREEN