PerkinElmer 200 UV/VIS Series, User Manual

Page: 54 / 177

Installation Unpacking Your Detector
2 - 4
Unpacking Your Detector
Carefully unpack the Series 200 UV/VIS LC detector and check for obvious signs of damage
that may have occurred during shipment. Immediately report damaged or missing items to
the shipping carrier and PerkinElmer.
Items Included
A Start-Up Kit (P/N N292-0140) is supplied with the detector. Use the following checklist to
inventory the Start-Up Kit parts. The part numbers should help you to identify items in the
kit, but do not use these part numbers to order replacements. You can order replacement
parts from PerkinElmer’s catalog service as described on the Customer Service page of this
manual.
Table 2-1. Start-Up Kit (P/N N292-0140)
Part Number Description Quantity
0992-0513 ONE-PIECE FINGERTIGHT TUBING PEEK
CONNECTION NUT 2
0992-3503 LAMP ACCESS WRENCH 1
0990-1690 FUSE 1
0998-8923 INTERCONNECTION TWISTED PAIR WIRE 25 FT.
0998-8986 LINECORD-125V 10A 1
0999-6604 RJ-11 STYLE MODULAR CONNECTORS 2
N235-0157 ANALOG SIGNAL CABLE 1
N291-0321 MODULAR CONNECTOR INTERCONNECT
CABLE 1
N293-0343 TURBOCHROM COMMUNICATION CABLE 1
N293-0344 FIRMWARE UPDATE CABLE 1
N293-1089 1/16 OD X .007 ID STAINLESS STEEL TUBING 1 FT.
0250-6495 1/16 OD X.030 ID TEFLON TUBING FOR
DETECTOR OUTPUT WASTE 5 FT.
0993-6504 USER’S MANUAL 1
N292-0123 HOLMIUM OXIDE WAVELENGTH CHECK
FILTER 1