12
Signal Tower LA6-POE Operation Manual
3.2.3. Wiring Example
The following is a basic wiring example.
If there are any special applications that require asking questions concerning this product, feel free to contact your PATLITE
Sales Representative.
* When lighting and flashing are used together in the Signal Tower mode with a PLC, it is necessary to separate the
flashing and non-flashing circuit outputs on the PLC side.
①
Wiring Example Index
LED Tier 1 / Input 1
Pin No.
(Refer to 3.2.1 Terminal Connector Pin Layout)
Function Name
[Signal Tower] mode/
[Smart Mode]
3.2.3.1. Connecting to Contact Relays with DC24V Input
LED Tier 1 / Input 1
LED Tier 2 / Input 2
LED Tier 3 / Input 3
LED Tier 4 / Input 4
LED Tier 5 / Input 5
Power Supply Wire
Flashing/Pulse Enable
Common line
Alarm 1 / Input 6
Mode Change
Common line
Power Supply Wire
Alarm 2 / Input 7
24V DC
（
Class 2
）
（
No polarity
）
External
Contact 2
For Flashing /
Pulse Enable
External
Contact 1
For Lighting
Voltage Contact Relay
Power
24VDC Input
Do Not Apply Voltage!
⑧
⑩
⑥
⑤
①
⑪
②
⑦
④
③
⑫
⑨
LA6-POE
Do Not Use!
