59
Signal Tower LA6-POE Operation Manual
5.6. "Clear" Function
This product can be cleared by using the "Clear" function. The clear function only operates while using the command
control method.
• The Clear status indicates the following status:
• To turn an LED Unit OFF
• To STOP the Buzzer sound
• To turn the Mute input OFF
• To turn the STOP input OFF
The method of executing the clear function is as follows:
• Push the "Clear" switch ( SN )
Push the "Clear" switch
• Perform "Clear" with the contact input detection function (Refer to "5.7 Contact Input Detection" on page 60).
!
CAUTION
While using the signal line control method, the "Clear" operation will not operate, even if the "Clear" switch is pushed.
