25
Signal Tower LA6-POE Operation Manual
4.6. Command Configuration
Set up for receiving PNS and PHN Commands.
[Setup Method]
①
Select either "TCP" or "UDP" in "Protocol."
②
Enter the port to be used for "Port Number."
③
Click the "Set" button to apply the setting.
Item
Contents
Default
Value
Input Parameter
Setup
Option
Protocol
Select between TCP or UDP.
TCP
-
×
Port Number Enter the receiving port number.
10000
Half-width numbers from 10000-65535
*
×
* The same port number as Modbus/TCP, and 60001-60008, 61001 cannot be set.
* The "Setup Option" indication is explained below to indicate in the diagram whether a value input is omissible (a
blank is used) or not.
The "x" indicates where is not omissible, or is selected from an item menu.
MEMO
• PNS Commands (Refer to "5.1. PNS Command")
• PHN Commands (Refer to "5.2. PHN Command")
