88
Signal Tower LA6-POE Operation Manual
9.2. Wall-mount Bracket (Stationary Type [SN])
Supported Option Model
NH-WST2
Main Unit
Wall-mount
Bracket
1
2
❶
Use 4 M5 screws (or equivalent) to mount the Wall-mount
Bracket (NH - WST 2).
Adjust the bolting torque in accordance with the quality
of the surface material of the wall, or the screw length.
!
CAUTION
The clamping surface should be level and sufficient enough
to tolerate shock, vibrations and the weight of the product.
All four mounting screws should be used.
MEMO
• The screws needed to mount to the surface of the wall is not
included.
• The customer needs to supply the mounting screws in
accordance to the construction material of the wall surface to
be mounted on.
❷
Using the three mounting screws supplied with the wall
mounting bracket (NH - WST 2), attach the product (LA 6 -
5 DSNWB - POE) to the NH - WST 2 as shown on the left.
Recommended Torque
0.6N/m (Standard)
!
CAUTION
Be sure to use both mounting screws and to tighten them
with the recommended torque.
MEMO
• Don’t use the protective sheet provided with the wall-mount
bracket.
• Attach the rubber sheet to the product without it sticking onto
the bottom plate.
Mounting Drawing
■
（Unit: mm）
Φ6
４ places
100
19
40
