Patlite LA6-POE Operation Manual Download Page 69

Page: 69 / 94

Signal Tower LA6-POE Operation Manual

5.9.7. Maintain Signal Tower Status

• When a transmission failure occurs between the signal tower and the Host PC, afeter that this function temporarily

retains the transmission information in the product.

• Once communication is possible again, information that was retained is transmitted in sequential order from old to new.

• The function can retain up to 32 units of information.

5.9.8. Visualization Application Software

There are two ways the visualization application software to collect the Signal Tower information.

• Acquire with “Signal Tower Information Transmission Function”.

• Acquire with “Detailed Status Acquisition Command”.

■

Signal Tower Information Transmission Function

LA6-POE

（Client）

（Server）

Transmit Signal Tower information

Visualization Application Software

Receive Signal Tower information

Visualize data

■

Detailed Status Acquisition Command.

LA6-POE

（Client）

Transmit the latest Signal Tower
information

Visualization Application Software

Transmit Acquisition Commnad

Receive the latest Signal Tower

information

Visualize data

（Server）

MEMO

When using software packages from PATLITE partners, please contact our sales office.

Summary of Contents for LA6-POE































































































Search results

Summary of Contents for LA6-POE

Reviews:

Related manuals for LA6-POE

Brands by name

Popular brands

Patlite LA6-POE, Operation Manual

Search results

Summary of Contents for LA6-POE

Reviews:

Related manuals for LA6-POE

Brands by name

Popular brands