79
Signal Tower LA6-POE Operation Manual
6.6. Buzzer Sound Control
There are two ways to adjust the buzzer sound volume for this product; using the Web setting method and setting the button
operation method. Refer to “4.5 Main Unit Setup” on page 24 for the method to set up via the Web Setting Screen.
The method to set up by operating the setting buttons is as follows.
Press for about 0.5 seconds.
Normal Operation
Buzzer Sound Control
To adjust the buzzer volume, press the Mode Switch for a short time (about 0.5 seconds). Whenever the Mode Switch is
pushed, the volume changes in the order according to the following figure, and a beep sound is heard with the changing of
the volume. Volume adjustment is completed when the beep sound is done.
Press for
about 0.5 sec.
Mid
OFF
Max
Low
Default: Max
Press for
about 0.5 sec.
Press for
about 0.5 sec.
Press for
about 0.5 sec.
