Patlite LA6-POE, Operation Manual

Page: 70 / 94

70
Signal Tower LA6-POE Operation Manual
6. Maintenance
6.1. Initialization
Please proceed following steps when it is required for initialization.
When you want to return to the factory settings.
When you forget the IP address of this product.
When you forget the Login Password of this product.
Initialization of this product can be done by the following methods.
• Initialize by operating the Multi-function button.
“Initialize Network Settings” and “Initialize Setting Items” can be executed.
• Initialize in the Web setting Screen.
Either "Initialize settings other than network settings" or "Network settings are also re-initialized" can be executed.
Initialization
Method
Selected initialization
contents
Setting items that can be initialized ( is initialized)
Signal Tower
mode setting
Buzzer
Sound/
Volume
Flashing
Cycle
Smart Mode
Setup
Network
Setup
Password
Control
System
Command Configuration
Modbus/TCP Setup
Contact Input Operation Setting
Mirroring Setup
Signal Tower information
transmission setup
Multi-
function
Button
Initialization network
settings
× × × × × ×
Initialize setting items
× × ×
WEB Setting
Screen
Initialize settings outside
network settings
× × × × ×
Network settings also re-
initialize
× × × ×
[How to reinitialize by operating the Multi-function button]
Press for about 15 seconds.
Product Initialization Normal Operation
• When the Multi-function button is pressed and released after about 15 seconds, the LEDs of all the tiers flash in blue
and the network setting can be initialized.
• From the flashing blue status, pressing and holding the Multi-function button for about 2 seconds will initialize the
network settings.
• When the Multi-function button is pushed briefly (about 0.5 seconds), from the blue flashing status, the LEDs of all the
tiers will flash in red and the setting items can be initialized.
• From the red flashing status, by pressing and holding the Multi-function button for about a second, the setting items
are initialized.
• When initialization is completed, it automatically restarts.