78
Signal Tower LA6-POE Operation Manual
<LED Color Change>
The LED color which operates in the Signal Tower mode can be changed.
First, the LED color change starts from the1st tier where the red LED turns on.
As shown in the figure below, whenever the Multi-function button is pushed for a short time (Ab. 0.5 sec.), the 1st tier of the
LED lighting color changes in order.
With the desired color lit, if the Multi-function button is pressed a little longer (about 3 seconds), the LED color of the second
tier can be changed to the desired color while the LED of the first tier remains lit with the selected color.
As with the first LED tier, change the LED color up to the last tier and push the Multi-function button a little longer (about 3
seconds) to complete the color change for all the LED tiers.
Push Button
About 3 sec.
Push Button
About 3 sec.
Select the desired
color, then enter
it to move onto
the next tier.
Push Button
About 3 sec.
Repeat for
all tiers.
Push Button
About 3 sec.
The procedure is completed
when the last tier is set.
Push Button
About 3 sec.
Setup
Complete
Red
Amber
Green
Blue
White
Purple
Pink
Skyblue
Lemon
Yellow
OFF
Start
Push Button
About 0.5 sec.
Red is the first
color selected.
Continue pressing
the switch until the
desired color is
cycled through to be
selected.
!
CAUTION
If there is a tier which does not change color, be sure to reset all tiers and do over.
None of the LED tier colors are saved until the last tier is set up.
If the operation is not done within 15 seconds or more, the LED colors return to normal operation without saving the
selected LED colors.
