17
Signal Tower LA6-POE Operation Manual
[ Send a command to LA6-POE and collect information ]
①
Set up the LA6-POE network.
• Set the IP address for the network. (Refer to “4.3 Network Setup” on page 19)
②
Set up the LED unit colors and combinations.
• Use the data setup application to create the LED unit colors and combinations.
(Refer to the help section in the data setup application.)
• Use the Web Setup Screen to set up. (Refer to "4.4.2 WEB Setup" on page 22)
③
Load the Setup Data information into the LA6-POE.
• Use the Web Setup Screen to load the data. (Refer to "4.4.1 Loading Setup Data" on page 20)
* When loading data using the USB cable,be sure to synchronize the data in the "Main unit setup" screen.
④
Set up the control method.
• In the "Main Unit Setup" screen, set to the ”Signal Wire control.” (Refer to "4.5 Main Unit Setup" on page 24)
⑤
Command receiving setup.
• Set up for receiveing commands. (Refer to "4.6 Command Configuration" on page 25)
⑥
Set up the Signal Tower Information Transmission.
• Configure the Signal Tower Input Judgment. (Refer to "4.10 Information Transmission Setup" on page 31)
