64
Signal Tower LA6-POE Operation Manual
5.9. Signal Tower Information Transmission Function
Send the Signal Tower Information from LA6-POE. By using “Visualization application software”, you can use
collected Signal Tower Information to visualization.
What is About Visualization application software ?
Application software installed on the PC. Use this application to display information
collected by LA6-POE in a Gantt chart or graph.
Must be provided by the customer.
(Refer to "5.9.8 Visualization Application Software" on page 69)
5.9.1. System Overview
LA6-POE
Visualization application
software
Transmit Signal Tower information
Ethernet
Host PC
Signal Wire Control
5.9.2. Communication specifications
LA6-POE will automatically TCP connection to the receiver (ex: Visualization application software) , and Signal Tower
Information is transmitted when status changes occurs.
Automatic reconnection every 3 seconds when LA6-POE cannot connect or disconnect to receiver.
5.9.3. Transmission condition
Signal Tower Information is transmitted when the following conditions.
• When the signal input status changes “light on”.
• When the signal input status changes “light off”.
• When the signal input status changes “flashing”.
• When the smart mode executed.
• When the smart mode pattern transitioned.
• When a takt time over occurred.
• When connected to receiver.
• When Mute input, STOP input and Clear input changed ON.
5.9.4. Transmission Data Contents
Send the following data.
• Signal Tower status information.
• Signal Tower color information.
• Smart Mode status information ( Group Number, Mute, STOP Input, Pattern Number)
• Takt time overdue information.
• MAC addrres of this product.
