19
Signal Tower LA6-POE Operation Manual
4.3. Network Setup
The network parameters for this product can be setup through a browser. The default IP address is "192.168.10.1". The items
that can be set up through the System Setup Screen is as follows for "Network Setup."
If "Setup Automatically" is selected, this product can accesses a DHCP server to acquire network information.
Network Setup
Item
Contents
Default Value
Input Parameter
Setup Option
IP Address
Configuration Method
The method for setting up the IP address to this
product as manual or automatic is selected.
Setup Manually
*
×
IP Address
Enter the IP address of this product.
192.168.10.1
IP Address Format
×
Subnet Mask
Enter the subnet mask of this product.
255.255.255.0
IP Address Format
×
Default Gateway
Enter the default gateway of this product.
0.0.0.0
IP Address Format
×
* The "Setup Option" indication is explained below to indicate in the diagram whether a value input is omissible (a blank is
used) or not.
The "O" indicates where it is omissible.
The "x" indicates where is not omissible, or is selected from an item menu.
!
CAUTION
Even when the network Setup is changed to "Setup Automatically", if the DHCP server cannot be able to be accessed,
the network settings will not be changed.
If the DHCP server is not able to be accessed at the time of startup, the network settings start with the default values.
