26
Signal Tower LA6-POE Operation Manual
4.7. Modbus/TCP Setup
Set the port number to be used in Modbus/TCP.
[Setup Method]
①
Enter the port to be used for "Port Number."
②
Click the "Set" button to apply the setings.
Item
Contents
Default
Value
Input Parameter
Setup Option
Port
Number
Enter the port number.
502 Half-width digit 502, Or 1024-65535*
×
* The same port number as the command receiption function, and 60001-60008, 61001 cannot be set.
* The "Setup Option" indication is explained below to indicate in the diagram whether a value input is omissible (a
blank is used) or not.
The "x" indicates where is not omissible, or is selected from an item menu.
MEMO
Modbus/TCP Command (Refer to "5.3. Modbus/TCP")
