Panasonic DP-MB500 series, Operating Instructions Manual

Page: 80 / 200

6 Scanning
6.1 Touch panel screens for scanning
COPY FAX SCAN PRINT
QUICK JOB
PC Email Address FTP Server
SMB Folder USB Memory
6.2 Scanning from the unit (Push Scan)
You can easily scan a document by using the operation panel on the unit. You can select one of the following
scanning modes depending on how you intend to use the scanned image.
Scanning mode
" VIEWER "
*1*2
Viewing using Quick Image Navigator (Scan to Quick Image Navigator)
" FILE "
*1*2
Saving as a file to your computer (Scan to save as a file)
" EMAIL "
*1*2
Activating the default email software on your computer, then attaching the
scanned image as a file (Scan to email)
" OCR " *2
Opening the scanned image using OCR software (Scan to OCR)
" CLOUD " *1*2
Sending the scanned file to a cloud service.
" EMAIL ADDRESS " *1*3
Sending as an attached file to an email destination directly from this unit
(Scan to email address)
• To activate this feature, see "Activating scan to email address (LAN
supported models only) ( )" (page 82).
" FTP SERVER "
*1*3
Sending to an FTP server (Scan to FTP server)
• To activate this feature, see "Setting the information for scan to FTP server
(LAN supported models only) ( )" (page 82).
" SMB FOLDER "
*1*3
Sending to an SMB folder (Scan to SMB folder)
• To activate this feature, see "Setting the information for scan to SMB folder
(LAN supported models only) ( )" (page 83).
" USB MEMORY "
*1*4
Sending to a USB memory device (Scan to USB memory)
*1 You can send the document as a password-protected PDF file.
*2 You can select the scanned image that you want if the Auto Preview function is ON.
*3
LAN connection only. ( )
*4 Displayed only when the USB memory device is inserted in the USB port of the unit.
Note
• When scanning a document, we recommend using the scanner glass rather than the automatic document
feeder for better results. ( )
• Do not open the document cover when scanning a document with the automatic document feeder. ( )
• You can set the desired scan mode for push scan beforehand (feature #493).
1.
Set the original.
2.
Set the unit to the scan mode.
6 Scanning
80 Operating Instructions