Panasonic DP-MB500 series Operating Instructions Manual Download Page 179

Page: 179 / 200

13.4 Cleaning the pickup rollers

Clean the pickup rollers when documents fed from
the standard input tray frequently misfeed.

Turn the power switch OFF.

Pull the standard input tray ( ) until it clicks into
place, then pull it completely out, lifting the front
part of the tray.

Clean the pickup rollers ( ) with a cloth lightly
moistened with water, and let all parts dry
thoroughly.

Insert the standard input tray into the unit, lifting
the front part of the tray. Then push it completely
into the unit.

Note

• If there is any recording paper remaining in

the unit, remove it from the inside of the
unit.

13.4 Cleaning the pickup rollers

Operating Instructions

179

Summary of Contents for DP-MB500 series









































































































































































































Search results

Summary of Contents for DP-MB500 series

Reviews:

Related manuals for DP-MB500 series

Brands by name

Popular brands

Panasonic DP-MB500 series, Operating Instructions Manual

Search results

Summary of Contents for DP-MB500 series

Reviews:

Related manuals for DP-MB500 series

Brands by name

Popular brands