Panasonic DP-MB500 series Operating Instructions Manual Download Page 184

Page: 184 / 200

Item

Specifications

Internet fax

*6*7

Communications
protocol

TCP/IP, SMTP, POP3, SMTP AUTH, POP before SMTP

Email format

MIME Base 64 Content-type: Image/TIFF

Multipart/mixed (text/plain, Image/TIFF) attachment file
format

Data format

RFC3949 (RFC2301), TIFF-FX minimal set

Profile: TIFF-F
Encoding scheme: MH/MR/MMR
Maximum document size (Width x Length): 216 mm x
600 mm

Resolution: 8 dot x 3.85 lines/mm, 8 dot x 7.7 lines/mm, 8
dot x 15.4 lines/mm

Internet fax message
confirmation

MDN

Compatible network
types

Ethernet (10 Base-T/100 Base-TX/1000 Base-T)

Models supporting
transmission

Internet fax compliant with the TTC standards (JT-T37 full
mode)

Based on IEC 62301 standard.

Only when connected via USB interface and LAN mode (feature #580) is OFF.

Only when connected to a wired LAN.

Only when connected to a wireless LAN.

Only for models that include a handset unit. See page 19 if your unit has a handset.

Only for models that support LAN connection. (

)

Only for models that support the fax feature. (

)

Transmission speed depends on the page contents, resolution, telephone line conditions and capability of

the other party's machine.

Transmission speed is based on the ITU-T No. 1 Test Chart with original mode. If the capability of the other

party's machine is inferior to your unit, the transmission time may be longer.

*10 AG models only: 46 ppm

*11 To assure continued emission limit compliance:

– use only shielded Type-A male/Type-B male USB cable (Example: Hi-Speed USB 2.0 certified cable).
– use only shielded LAN cable. The cable should be a CAT 5 (Category 5) or higher for 10 Base-T/100

Base-TX, or CAT 5e (Enhanced Category 5) or higher for 1000 Base-T. (

)

*12 To protect the unit, use only shielded USB cable in areas where thunderstorms occur.

*13 Only for models that support wireless LAN. (

)

*14 The actual line speed may be different depending on the network environment and the wireless devices

connected.

*15 Depending on the wireless router (wireless access point) used, connections may not be possible between

the unit and the wireless router. When connecting with 802.11n, select WPA-PSK (AES) or WPA2-PSK

(AES) for security.

14.1 Specifications

184

Operating Instructions

Summary of Contents for DP-MB500 series









































































































































































































Search results

Summary of Contents for DP-MB500 series

Reviews:

Related manuals for DP-MB500 series

Brands by name

Popular brands

Panasonic DP-MB500 series, Operating Instructions Manual

Search results

Summary of Contents for DP-MB500 series

Reviews:

Related manuals for DP-MB500 series

Brands by name

Popular brands