Panasonic DP-MB500 series, Operating Instructions Manual

Page: 106 / 200

8.4.1 Various settings for sending faxes
To select the contrast
Adjust this setting depending on the darkness or lightness of the document. 5 levels (low to high) are available.
1.
: /FAX /QUALITY (repeatedly):
" CONTRAST "
: Display
" CONTRAST "
screen (page 105).
2.
Change the contrast. : OK/SET / :
" OK "
To select the resolution
1.
: /FAX /QUALITY (repeatedly):
" RESOLUTION "
: Display
" RESOLUTION "
screen (page 105).
2.
Select the resolution. OK/SET *1
Note
• If you select
" FINE "
,
" SUPER FINE "
or
" PHOTO "
resolution, transmission time will increase.
*1
For 2-line LCD models only. ( )
To select the duplex setting
You can send 2-sided originals using the automatic document feeder.
1. : /DUPLEX
: Display
" DUPLEX "
screen (page 105).
2. Select the desired binding of the original.
3. OK/SET *1
*1
For 2-line LCD models only. ( )
8.4.2 Selecting the destination from stored items
Store the desired names and telephone numbers into the address book beforehand (page 62).
Using address book
1. : /FAX
: Display
" ADDRESS BOOK "
screen (page 105).
2. Select the desired item.
Note
• If the LDAP setting is activated beforehand (page 131), select
" LDAP SEARCH "
or
" ADDRESS BOOK "
.
OK/SET *1
For LDAP search, enter the name using the dial keypad (up to 11 characters), then press :
OK/SET / :
" OK "
to start searching.
*1
For 2-line LCD models only. ( )
Using the one-touch dial feature ( )
Using station 1-3:
Press the desired station key.
Using station 4-6:
Press /LOWER , then press the desired station key.
8.4.3 Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit is receiving a fax or sending a fax from memory.
– Up to 10 reservations when sending
– Up to 11 reservations when receiving
8.4.1 Various settings for sending faxes
106 Operating Instructions