7.3.11 Sorting copies by rotation
You can sort output into sets of documents (collated) or into sets of pages (uncollated).
Important
•
Make sure of the following when setting recording paper into trays:
–
Recording paper should set in portrait orientation for one paper tray, and in landscape orientation
for another paper tray.
–
The paper set in each tray for this feature should be the same paper size and type.
1.
:
/PAGE LAYOUT
(repeatedly):
"
ROTATE SORT
"
:
Display
"
Settings
"
screen (page 86).
"
ROTATE SORT
"
2.
Select
"
ON
"
.
OK/SET
*1
For 2-line LCD models only. (
)
Note
• Supported paper sizes are A4, Letter, B5(ISO)
.
*1
Not supported duplex printing.
Collated pages
3
2
1
3
2
1
2
1
3
3
2
1
Uncollated pages
3
2
1
2
2
2
3
1
1
1
3
3
7.3.12 To make copies with
"A3"
,
"11 × 17"
,
"8K"
, or
"B4"
documents (scanner glass only)
Important
•
Make sure that the paper size of the multi-purpose tray (feature #381) is set to the same as the
document size beforehand.
1.
Set the document as described below.
• Make sure to align the document with the corner where the mark is located.
2.
Select the size of the original and
"
#2
"
for input tray from the copy size settings.
3.
If necessary, change the resolution and contrast according to the type of document.
• To select the contrast, see page 87.
• To select the resolution, see page 87.
4.
If necessary, enter the number of copies (up to 99).
5.
Press
/START
to scan the upper half.
7.3.11 Sorting copies by rotation
100
Operating Instructions
