Omron ZX-GT -, User Manual

Page: 84 / 166

Special Functions
ZX-GT User’s Manual
82
Special Functions
Zero Reset Memory
Select whether or not to hold the measured value after the zero reset was performed
(zero reset level) when the power is turned OFF.
If zero reset memory is set to [ON], the zero reset level will be written in the Controller's non-
volatile memory (EEPROM) each time a zero reset is performed. The EEPROM can be written
a maximum of 100,000 times. Setting the zero reset memory to [ON] can, therefore, use up the
life of the memory and lead to malfunctions.
Executing and Canceling a Zero Reset p.47
1
Select the special setting.
2
Set zero reset memory.
Setting value Range
OFF Zero reset is canceled when the power is turned OFF. (default
value)
ON The zero reset level is saved when the power is turned OFF.
Select [SPCL].
Select [ETC] or [ALL].
Confirm the selection.
Select [ZRMEM].
Change the selection.
Confirm the selection.
Important
SUB
SUB
zx_gt.book Page 82 Wednesday, May 30, 2007 3:29 PM