Omron ZX-GT -, User Manual

Page: 82 / 166

Setting Communication Conditions
ZX-GT User’s Manual
80
Setting Communication Conditions
RS-232C Communications Specifications
Set the communication specifications for the Controller matched to the communications
specifications of external devices. After setting the communications specifications, the
Controller must be turned OFF then back ON again to enable the settings.
1
Select the special setting.
2
Set the baud rate.
3
Set other items by the same procedure.
Setting value Range
BPS (baud rate) 1200, 2400, 4800, 9600, 19200, 38400
(default value: 38400)
LEN (data length) 7, 8 (default value: 8)
S.BIT
(stop bit) 1, 2 (default value: 1)
PRTY (parity) NONE (none), ODD (odd), EVEN (even)
(default value: NONE)
HD.FT
(header/footer selection) ST.ET (STX+ETX), CR, CR.LF (CR+LF)
(default value: CR)
Select [SPCL].
Select [IFU] or [ALL].
Confirm the selection.
Select [BPS].
Change the selection.
Confirm the selection.
SUB
SUB
zx_gt.book Page 80 Wednesday, May 30, 2007 3:29 PM