Omron ZX-GT -, User Manual

Page: 49 / 166

Functions and Operations during Operation - RUN Mode
47
ZX-GT User’s Manual
2
BA
SIC OPERATIONS
Executing and Canceling a Zero Reset
When the zero reset function is used, the measured value can be reset to a reference
value of 0 when the ENT key is pressed or an external signal is input.
Executing/Canceling a Zero Reset by External Signal Input p.126
When the Controller is turned OFF, all settings are cleared from memory (i.e. are returned
to their defaults). This setting can also be changed so that settings are saved in memory
when the power is turned OFF.
Zero Reset Memory p.82
Executing zero reset
1
Set the measurement object to be used as the reference in place.
2
Execute the zero reset.
The zero reset indicator lights, and the current
measured value is registered as "0" (zero).
Canceling zero reset
1
Cancel the zero reset.
The zero reset indicator goes out.
Hold down for at least one second.
A value other than 0 can also be set.
Zero Reset Memory p.82
Hold down the R key for at least three
seconds with the ENT key held down.
SUB
Note
SUB
zx_gt.book Page 47 Wednesday, May 30, 2007 3:29 PM