Omron ZX-GT -, User Manual

Page: 87 / 166

Special Functions
ZX-GT User’s Manual
3
FUNCTION SETTINGS
85
Switching Banks
The ZX-GT can hold up to two sets of settings, which are called a "bank". Banks can be
switched from an external device when changing the device setup.
The following data can be saved in memory as settings of banks.
• HIGH and LOW thresholds
• Hysteresis width
• Number of IC leads, IC lead pitch, IC lead pitch tolerance (IC lead pitch judgment mode)
• Number of IC leads, IC lead width, IC lead width tolerance (IC lead width judgment mode)
• The first and second specified edges (Specified edge measurement mode)
Setting the Bank Switching Source
Set from where switching of banks is to be instructed.
1
Select the special setting.
2
Set the I/O conditions.
Setting value Description
KEY Bank switching is performed by operating the control keys. (default
value)
I-O Bank switching is performed from an external device on the bank
switching input wire on the Controller.
Select [SPCL].
Select [BANK] or [ALL].
Confirm the selection.
Select [BK.IN].
Change the selection.
Confirm the selection.
Important
SUB
SUB
zx_gt.book Page 85 Wednesday, May 30, 2007 3:29 PM