Omron ZX-GT -, User Manual

Page: 94 / 166

Communications Using the Controller I/O Cable
ZX-GT User’s Manual
92
Assignment of input signal wires
Cable color Signal Function
Pink Bank switching input Bank 1 is selected when this input is OFF, and bank 2 is
selected when this input is ON.
Bank switching is enabled only when the bank switching
source is set to "I-O".
Switching Banks p.85
Orange Zero reset input Sets the measured value to zero.
• At zero reset execution
Turn the zero reset signal ON for 0.2 to 0.8 seconds.
After the zero reset signal turns OFF, the zero reset is
executed within one measurement cycle.
• At zero reset cancellation
Turn the zero reset signal ON for at least
1 second. The zero reset is cancelled within one
measurement cycle after 1 second elapses.
Purple Timing input Use this input for hold function timing.
The sub-display will show "TIMIG" while the hold function
timing is input.
Red Reset input This input resets all outputs.
When this input is ON, internal calculations are
discontinued, all judgment outputs are turned OFF, and
the maximum value (approx. 5.5 V at voltage output or 23
mA at current output) is output as the analog output.
The sub-display will show "RESET" while the reset is
input.
zx_gt.book Page 92 Wednesday, May 30, 2007 3:29 PM