Omron ZX-GT -, User Manual

Page: 57 / 166

Settings Matched to Specific Measurement Requirements
ZX-GT User’s Manual
3
FUNCTION SETTINGS
55
IC Lead Width Judgment Mode [PIN-D]
This mode is for measuring the width of
multiple IC leads, and for judging whether
the diameter is within the tolerance.
How to select the measurement
mode p.44
After selecting the measurement mode, make the following settings.
1
Set the number of IC leads.
2
Set the IC lead width to be used as the standard.
3
Set the IC lead width tolerance value.
Description Range
Number of IC leads (A) Set the number of IC leads of the measurement
object. 1 to 14
(IC leads)
IC lead width (B) Set the IC lead width to be used as the standard. 0.3 to 28 (mm)
IC lead width tolerance Set the tolerance of the measured value with
respect to the reference value. 0 to 28 (mm)
Change the selection.
Confirm the selection.
The sub-display flashes.
Move from one digit to another.
Change the current value.
Confirm the selection.
The sub-display flashes.
Move from one digit to another.
Change the current value.
Confirm the selection.
SUB
SUB
SUB
SUB
zx_gt.book Page 55 Wednesday, May 30, 2007 3:29 PM