Omron ZX-GT -, User Manual

Page: 61 / 166

Settings Matched to Specific Measurement Requirements
ZX-GT User’s Manual
3
FUNCTION SETTINGS
59
Calculating the Measurement Result [CALC]
Measurement results can be calculated
between two Controllers. Set the expression
on the Controller having the larger CH No.
The calculation result also is output from the
Controller having the larger CH No.
When [WIDTH] is set, the range of the measured value becomes 0.00 to 599.99 mm.
When three Controllers are connected to each other
Output Data List p.90
Setting value Description
OFF The measurement result is not calculated. (default value)
A+B Calculates the sum of the measurement results for two Controllers.
A-B Calculates the difference between the measurement results for two
Controllers.
WIDTH Measures the width of a large measurement object exceeding 28
mm.
After selecting this value, set a measurement target of known width
to the measured state and enter the width.
Range: 0.00 to 599.99 (mm)
Set the expression on the Controller having the larger CH No.
The calculation result also is output from the Controller having the larger CH No.
One of the calculation targets is always CH1.
CH2 CH1
Important
Note
zx_gt.book Page 59 Wednesday, May 30, 2007 3:29 PM