Omron ZX-GT -, User Manual

Page: 101 / 166

I/O Timing Charts
ZX-GT User’s Manual
4
COMMUNICATION
S
WITH EXTERNAL DEVICES
99
Bank switching time
The time after execution of bank switching until output of measurement results is started
is "50 ms + output response time x averaging number". The output response time differs
as follows according to the output destination and settings. Also, the trigger cannot be
input during bank switching. Bank switching is enabled only when the bank switching
setting is set to "external input wire."
Output response time (maximum)
Reset input
Input the reset signal for at least 1 ms. After a reset input, output turns OFF "within the
output response time x averaging number." (analog output maximum value: approx. 5 V/
approx. 23 mA)
Standard mode (NORM) High-speed mode (FAST)
Judgment output 2.5 ms 1.5 ms
Analog output 2.5 ms 1.5 ms
IFU binary output Number of connected
Controllers x 0.3 ms + 2.8 ms Number of connected
Controllers x 0.3 ms + 1.8 ms
zx_gt.book Page 99 Wednesday, May 30, 2007 3:29 PM