Omron ZX-GT -, User Manual

Page: 48 / 166

Functions and Operations during Operation - RUN Mode
46
ZX-GT User’s Manual
Functions and Operations during Operation
- RUN Mode
Switching the Measured Value Display
You can switch between the main display and sub-display while operating the Controller
in the RUN mode. This allows you to verify thresholds, resolution and other settings while
viewing measured values according to your specific application.
The measured value is displayed on the main display, and thresholds and other
information are displayed on the sub-display.
*1: In the IC lead pitch and IC lead width judgment modes, standard values and tolerances are displayed
according to the threshold switch setting.
*2: In the IC lead pitch and IC lead width judgment modes, "0V" is displayed at all times.
*3: In the IC lead pitch and IC lead width judgment modes, "4mA" is displayed at all times.
*4: In the IC lead pitch and IC lead width judgment modes, "-----" is displayed at all times.
Special mode p.50
SUB SUB SUB
SUB SUB
Threshold Voltage value Current value
Resolution Present value
(*1) (*2) (*3)
(*4) (*4)
zx_gt.book Page 46 Wednesday, May 30, 2007 3:29 PM