Setting Hold Functions
ZX-GT User’s Manual
3
FUNCTION SETTINGS
73
Setting Hold Functions
Set hold conditions for measured values. The hold functions hold data for specific points,
such as the minimum or maximum value, during the sampling period (sampling time), and
output those values at the end of the sampling period.
Hold
Setting value
Description
OFF
Hold measurement is not performed. The measured value is output
at all times. (default value)
P-H (Peak hold)
The maximum value is held during the sampling period. The output
changes at the end of the sampling period, and is held until the end
of the next sampling period.
B-H (Bottom hold)
The minimum value is held during the sampling period. The output
changes at the end of the sampling period, and is held until the end
of the next sampling period.
SMPLE (Sample hold)
The measured value is held at the start of the sampling period. The
output changes at the start of the sampling period and is held until
the start of the next sampling period.
Sampling period
Current
measured value
Output
Maximum
value
Sampling period
Current
measured value
Output
Minimum
value
Sampling period
Current
measured value
Output
zx_gt.book Page 73 Wednesday, May 30, 2007 3:29 PM
Summary of Contents for ZX-GT -
