Omron ZX-GT -, User Manual

Page: 76 / 166

Setting Hold Functions
ZX-GT User’s Manual
74
1
Select the hold conditions.
2
Enter the trigger for measurement in the hold
mode.
Connect the Controller's timing input signal wire,
or enter the trigger for starting sampling using the
↑
UP key.
PP-H
(Peak-to-peak hold) The difference between the minimum and maximum values is held.
This option is selected mainly when detecting vibration. The output
changes at the end of the sampling period, and is held until the end
of the next sampling period.
AVE-H (Average hold) The average measured value during the sampling period is held.
The output changes at the end of the sampling period, and is held
until the end of the next sampling period.
Select [HOLD].
Change the selection.
Confirm the selection.
Setting value Description
Sampling period
Current
measured value
Output
(max. value - min.
value)
Min. value
Max. value
Sampling period
Current
measured value
Output
(average of
measured values)
SUB
zx_gt.book Page 74 Wednesday, May 30, 2007 3:29 PM