Mounting and Connecting Devices
ZX-GT User’s Manual
38
Connecting Interface Units
When outputting measurement data in binary or performing RS-232C communications,
attach the Interface Unit (sold separately).
1
Open the Controller connector
cover by lifting and sliding it up.
2
Mount the Interface Unit on a DIN
track.
3
Slide the Interface Unit to insert it
into the connector on the
Controller.
Channels Nos. when Controllers are connected to each other
Cable clamp provided with the Controller
The channel Nos. when Controllers are connected to each other are arranged as follows from
the right "CH1, CH2, CH3".
The RS-232C cable can be fixed to devices, for example, using the cable clamp supplied with
the Controller.
1
2
3
Note
Interface
Unit
CH3
CH2
CH1
Controller
Note
Installation
Removal
Lift up the tab.
zx_gt.book Page 38 Wednesday, May 30, 2007 3:29 PM
Summary of Contents for ZX-GT -
