Omron ZX-GT -, User Manual

Page: 53 / 166

Settings Matched to Specific Measurement Requirements
ZX-GT User’s Manual
3
FUNCTION SETTINGS
51
Reference E xp l anat i on
T he i nterrupted beam w i dth of two Sensors i s ca l cu l ated to measure the
d i ameter .
su l ts
T he w i dth up to the end of the f i rst i nterrupted beam sect i on i s measured .
T he edge pos i t i on of g l ass sheets i s measured . I n th i s mode, the
d i stance from the beam top edge to the edge of the transparent
mater i a l i s measured .
T he w i dth from the top edge of the beam up to the center of the f i rst
and l ast edges of the measurement object i s measured .
T h i n w i re of up to 0 . 1 mm i n d i ameter i s measured . Measurement
deta il s are the same as those for the " center pos i t i on measurement
mode ."
nt mode
e
ode
de
T he w i dth from the f i rst edge of the measurement object up to the l ast
edge i s measured .
T he w i dth up to the end of the f i rst i nc i dent beam sect i on i s measured .
T he w i dth between two spec i f i ed edges i s measured .
mode
de
de
T he d i stance between I C l ead centers i s measured, and whether or not
the p i tch i s w i th i n the to l erance i s judged .
T he I C l ead w i dth (mu l t i p l e I C l eads O K ) i s measured, and whether or
not the d i ameter i s w i th i n the to l erance i s judged .
e
e
mode
T he w i dth up to the end of the f i rst i nc i dent beam sect i on i s measured .
p.52
p.52
p.58
p.53
p.58
p.53
p.52
p.56
p.59
p.54
p.55
zx_gt.book Page 51 Wednesday, May 30, 2007 3:29 PM