Omron ZX-GT -, User Manual

Page: 62 / 166

Settings Matched to Specific Measurement Requirements
ZX-GT User’s Manual
60
1
Select the type of calculation.
When [WIDTH] is set
2
Set the width of the standard object.
Flow of measurement during calculation
Select [CALC].
Change the selection.
Confirm the selection.
The sub-display flashes.
Move from one digit to another.
Change the current value.
Confirm the selection.
The value after averaging of each CH is calculated.
SUB
SUB
Note
Measurement processing Measurement processing
Averaging Averaging
2-sensor operation processing
Hold processing Hold processing
Zero reset processing Zero reset processing
Judgment processing Judgment processing
Output processing Output processing
CH1 CH2
The measurement result is
taken as the analog output. Calculation results of
CH1 and CH2 are taken
as the analog output.
Hold processing is
executed on measured
result of CH1.
Data of CH1 is acquired to execute
calculation.
Hold processing is executed on
calculation result.
Zero reset processing is executed on
calculation result.
Judgment processing is executed on
calculation result.
Zero reset processing is
executed on measured
result of CH1.
Judgment processing is
executed on measured
result of CH1.
zx_gt.book Page 60 Wednesday, May 30, 2007 3:29 PM