Omron ZX-GT -, User Manual

Page: 88 / 166

Special Functions
ZX-GT User’s Manual
86
Bank Switching (change of device setup)
The currently selected bank can be switched to the other bank.
Switching banks by operating the control keys
When [KEY] is set as the source from where banks are to be switched, the banks can be
switched by operating the control keys on the Controller.
Setting the Bank Switching Source p.85
1
Select the special setting.
2
Set the bank.
Switching banks by external signal input
When [I-O] is set as the source from where banks are to be switched, the banks can be
switched from an external device on the bank switching input wire on the Controller.
• Setting the Bank Switching Source p.85
• Assignments and Functions of I/O Signal Wires p.91
Setting value Description
1, 2 Selects the target bank. (default value: 1)
Select [SPCL].
Select [BANK] or [ALL].
Confirm the selection.
Select [S.BANK].
Change the selection.
Confirm the selection.
SUB
SUB
zx_gt.book Page 86 Wednesday, May 30, 2007 3:29 PM